Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on a Mitsubishi Outlander 2

Model: Mitsubishi Outlander MK 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Air filter

See other generations:
Video tutorial

If you own a Mitsubishi Outlander Mk2 and need guidance on correctly replacing the engine air filter, you are in the right place. Simply read the instructions carefully and then put them into practice.

First, park your Mitsubishi Outlander safely and turn off both the engine and the ignition. Next, lift the bonnet and locate the air box, then remove the protective cover and proceed with replacing the air filter.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How do you replace the air filter of the Mitsubishi Outlander?
How do you replace the air filter of the Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) To replace the air filter of the Mitsubishi Outlander, you will need to open the hood to access the components located within the engine compartment.…
How to replace the air filter of the Mitsubishi Outlander
How to replace the air filter of the Mitsubishi Outlander
Mitsubishi Outlander (2001-2006 / MK 1) The following video tutorial shows us how to replace the air filter of the Mitsubishi Outlander model MK1 on our own. The air filter is located insid…
How to Replace the Spark Plugs on a Mitsubishi Outlander
How to Replace the Spark Plugs on a Mitsubishi Outlander
Mitsubishi Outlander (2001-2006 / MK 1) Before you can start, open the bonnet of your Mitsubishi Outlander. Begin by unscrewing and removing the screws that secure the upper engine cover, t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos