Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Mitsubishi Outlander

Model: Mitsubishi Outlander MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Spark plugs

See other generations:
Video tutorial

Before you can start, open the bonnet of your Mitsubishi Outlander. Begin by unscrewing and removing the screws that secure the upper engine cover, then remove the cover itself.

Next, disconnect the spark plug leads. This will give you access to the spark plugs themselves.

Proceed to unscrew and remove them. Once you have completed this step, the disassembly is finished.

To install the new spark plugs and close everything up, simply follow this procedure in reverse, and you will have completed the replacement.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Mitsubishi Outlander
How to Replace the Spark Plugs on a Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) Before you can start, open the bonnet of your Mitsubishi Outlander to gain the necessary space to work in the engine bay. Begin by disconnecting the …
How to Reset the Service Light on the 2020 Mitsubishi Outlander?
How to Reset the Service Light on the 2020 Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) The service light on the Mitsubishi Outlander MK3 (produced between 2013 and 2020) can be reset very easily using a single button. Once the ignition …
How to Reset the Service Light on the Mitsubishi Outlander?
How to Reset the Service Light on the Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) To reset the service light on the Mitsubishi Outlander, turn on the ignition by inserting the key into the ignition switch. Once the dashboard lights…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos