Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Mitsubishi Outlander?

Model: Mitsubishi Outlander MK 3 - Years 2013-2021
Part: Service warning light

In order to reset the Service light of the Mitsunishi Outlander, you need to turn on the instrument panel by turning the key inside the ignition switch. Once the panel is on, you can press and hold the button with two rectangles located on the right side of the steering wheel. By holding down the button, you will notice that the Service light will start flashing, until the maintenance interval is reset. At the end of the procedure, you can release the button and turn off the panel.

Posted on 23 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the 2020 Mitsubishi Outlander?
How to Reset the Service Light on the 2020 Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) The service light on the Mitsubishi Outlander MK3 (produced between 2013 and 2020) can be reset very easily using a single button. Once the ignition …
How to reset the maintenance light on the 2010 Mitsubishi Outlander
How to reset the maintenance light on the 2010 Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) If you want to find out how to correctly perform a manual reset of the maintenance light on your 2010 Mitsubishi Outlander, all you have to do is fol…
How to reset the service light on the Mitsubishi Outlander
How to reset the service light on the Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) When the service light on a Mitsubishi Outlander vehicle comes on, it is necessary to first perform the required maintenance on the vehicle, such as …

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos