Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the steering wheel and airbag of the Mitsubishi Pajero

Model: Mitsubishi Pajero V80, MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Steering wheel

See other generations:
Video tutorial

Today we will discover the instructions that will allow us to disassemble and replace the steering wheel and its airbag of the Mitsubishi Pajero. First of all, we get into the passenger compartment and start by disconnecting the battery terminals as a precaution; then we remove the steering wheel airbag, pushing on the rear holes and disconnecting the electrical connector, as shown in the video.

At this point, we unscrew the central screw of the steering wheel, disconnecting all the wiring to remove it and replace it with the new one; we make the electrical connections and reassemble the steering wheel airbag correctly.


Posted on 13 September 2025 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) Before you can begin, sit in the driver's seat of your Mitsubishi Pajero. Using a Torx T30 screwdriver, start by unscrewing and removing the screws t…
How to Remove the Airbag from a Mitsubishi Pajero V60
How to Remove the Airbag from a Mitsubishi Pajero V60
Mitsubishi Pajero (1999-2006 / V60, MK 3) To remove the driver’s side airbag from the steering wheel, first disconnect the negative battery terminal to prevent the warning light from illumina…
Replacing the Steering Wheel Airbag on Mitsubishi Pajero
Replacing the Steering Wheel Airbag on Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) To begin, lift the bonnet and disconnect the battery by unscrewing the two terminals (negative first). Now move to the steering wheel: unscrew the tw…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos