Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero

Model: Mitsubishi Pajero V60, MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Airbag

See other generations:
Video tutorial

Before you can begin, sit in the driver's seat of your Mitsubishi Pajero. Using a Torx T30 screwdriver, start by unscrewing and removing the screws that secure the airbag to the steering wheel, located on both sides of the steering column.

Once you have removed both screws, the airbag will be free. To remove it, simply pull it towards you and disconnect the connector located at the back.

This completes the successful removal of the airbag from your Mitsubishi Pajero.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to disassemble the steering wheel and airbag of the Mitsubishi Pajero
How to disassemble the steering wheel and airbag of the Mitsubishi Pajero
Mitsubishi Pajero (2006-2021 / V80, MK 4) Today we will discover the instructions that will allow us to disassemble and replace the steering wheel and its airbag of the Mitsubishi Pajero. Fir…
How to Remove the Airbag from a Mitsubishi Pajero V60
How to Remove the Airbag from a Mitsubishi Pajero V60
Mitsubishi Pajero (1999-2006 / V60, MK 3) To remove the driver’s side airbag from the steering wheel, first disconnect the negative battery terminal to prevent the warning light from illumina…
How to remove the airbag in a Mitsubishi Pajero
How to remove the airbag in a Mitsubishi Pajero
Mitsubishi Pajero (2006-2021 / V80, MK 4) In this video tutorial, you can see how to remove the airbag in a Mitsubishi Pajero by following a few simple steps that will help you work independe…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos