Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2020 Mitsubishi Outlander?

Model: Mitsubishi Outlander MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

The service light on the Mitsubishi Outlander MK3 (produced between 2013 and 2020) can be reset very easily using a single button. Once the ignition is on, press the "info" button on the dashboard until the display shows the service screen, and from here, hold down the button until the text starts to flash, then release it and press it briefly again to confirm.

You’re done; the service light on your Mitsubishi Outlander has been successfully reset and will only illuminate again when it’s time for a new service.


Posted on 19 September 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on the Mitsubishi Outlander
How to Reset the Maintenance Light on the Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) This video shows how to reset the maintenance light on a 2007 Mitsubishi Outlander. It is advised to perform this procedure only after completing the…
How to Reset the Service Light on a 2016 Mitsubishi Outlander
How to Reset the Service Light on a 2016 Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Are you the owner of a 2016 Mitsubishi Outlander and want to know how to reset the service light? The answer can be found in this video, which should…
How to Reset the Service Light on a Mitsubishi Outlander
How to Reset the Service Light on a Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) This brief video tutorial shows how to reset the service light on a Mitsubishi Outlander, model produced from 2013 to 2021. Before performing this op…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos