Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Outlander
    4. : How to reset the service light on a Mitsubishi Outlander

Mitsubishi Outlander - Video tutorial

Model: Mitsubishi Outlander MK 3 - Years 2013-2021
Part: Checks and maintenance
Operation: How to reset the service light on a Mitsubishi Outlander

In this short video tutorial, let's see how to reset the service warning light on a Mitsubishi Outlander, model produced from 2013 to 2021. Before carrying out this operation, it is necessary to have performed the ordinary vehicle coupon, but now let's see how to proceed. To carry out the reset we must use the first button located on the dashboard behind the ignition lock, then we turn on the injection of the vehicle without starting it, and we go to press this button to open the menu on the information display, we continue to press it until we reach under the item relating to the life of the engine oil, therefore we hold down the same button again to reset the service light.


Posted on 9 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Outlander 2013-2021 - What are the lights on the Mitsubishi Outlander? Read Answer
    • Outlander 2013-2021 - What does the orange petrol pump light in the instrument cluster of a Mitsubishi Outlander mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos