Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the air filter of the Mitsubishi Outlander?

Model: Mitsubishi Outlander MK 3 - Years 2013-2021
Part: Air filter

To replace the air filter of the Mitsubishi Outlander, you will need to open the hood to access the components located within the engine compartment. In the upper right part, you will be able to locate the filter box, which must be opened by loosening the fastening screws of the hose connections. Once the filter box has been opened, you can remove the filter from its housing in order to insert the new replacement part. After the replacement, you can close the box, ensuring that everything is functioning properly.

Posted on 18 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Air Filter on Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Replace the cabin air filter on a Mitsubishi Outlander if you have covered a considerable distance. Open the car door, pull up the engine compartment…
How to replace the air filter of the Mitsubishi Outlander
How to replace the air filter of the Mitsubishi Outlander
Mitsubishi Outlander (2001-2006 / MK 1) The following video tutorial shows us how to replace the air filter of the Mitsubishi Outlander model MK1 on our own. The air filter is located insid…
How to replace the engine air filter of the Mitsubishi Outlander 2
How to replace the engine air filter of the Mitsubishi Outlander 2
Mitsubishi Outlander (2007-2012 / MK 2) If you own a Mitsubishi Outlander Mk2 and need a guide to correctly replace the engine air filter, then you are in the right place. All you have to d…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos