Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. :
  5. Outlander
  6. : How to replace engine oil and oil filter on mitsubishi outlander

Mitsubishi Outlander - Video tutorial

Model: Mitsubishi Outlander MK 2 - Years 2007-2012
Part: Engine oil
Operation: How to replace engine oil and oil filter on mitsubishi outlander

Below we will see, in this short and simple guide, how to carry out the routine maintenance coupon, replacing the engine oil and the oil filter, of the Mitsubishi Outlander. First we lift the car and start unscrewing the oil vent bolt that we find on the sump, making it drain into a container for about ten minutes; then let's remove, with the appropriate wrench, the oil filter, replacing the cartridge with the new one, as illustrated in the video. At this point, unscrew the filler cap and pour in the new engine oil, filling up to the maximum level!


Posted on 2 May 2023 by ScegliAuto

Other guides that may interest you

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos