Do it yourself
| ||||
|
Mitsubishi Pajero - Video tutorial
Model: Mitsubishi Pajero
V60, MK 3
- Years 1999-2006 In order to replace the injection pump of the Mitsubishi Pajero, you need to open the hood so that you have access to the components located inside the engine compartment. Here, on the left side of the engine compartment, you will be able to locate the pump, which will be secured to its housing on the engine block with the appropriate screws. By loosening these screws and disconnecting the fuel passage tubes, you will be able to remove the old pump from its seat. Then, you can insert the new one, securing and connecting it properly to its seat.
Posted on 7 October 2023 by ScegliAuto
Other guides that may interest you
|
How to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.032
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |