Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Injection Pump on a Mitsubishi Pajero

Model: Mitsubishi Pajero V60, MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Fuel pump

See other generations:
Video tutorial

To replace the fuel injection pump on this vehicle, you can find the main operations summarised in this description, and you can refer to the images in the video. After opening the bonnet, disconnect the battery and remove it, also removing the base of the battery itself, then the coolant hoses and the intake diaphragm.

Below it, on the right side of the engine, you will find the pump. Proceed to unscrew the nuts securing the fuel lines to the engine, then unscrew the bolts securing the pump to the engine block.

Carry out the necessary pump revision or replacement, then reverse all operations to reassemble everything.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

Mitsubishi Pajero (1999-2006 / V60, MK 3) To replace the fuel injection pump on the Mitsubishi Pajero, open the bonnet to access the components located in the engine bay: here, on the left si…
Mitsubishi Pajero (2006-2021 / V80, MK 4) To replace the fuel pump on a Mitsubishi Pajero, loosen the screws securing the trim panel located at the top: this panel is directly behind the rear…
Mitsubishi Pajero (2006-2021 / V80, MK 4) In today’s video, you will see how to remove the fuel pump from a fourth-generation Mitsubishi Pajero in simple steps. First, access the rear of the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tire Pressure Light on the Land Rover Range Rover Evoque

Today, let's go through the steps to reset the tire pressure light on the Land Rover Range Rover Evoque. First, get in the vehicle and turn on the ignition; then navigate to the settings on the onboard computer and select the tire pressure option to view the values, as shown in the video. At this point, restore the correct pressure in all four tires to clear the tire pressure warning light that appears on the instrument cluster!

Watch the video!


by ScegliAuto

More videos