Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to replace the rear light clusters of the Fiat Punto

Fiat Punto - Video tutorial

Model: Fiat Punto Grandepunto , MK 3, 199, Punto EVO - Years 2005-2018
Part: Tail light
Operation: How to replace the rear light clusters of the Fiat Punto

In this video we will see how to replace the halogen rear lights of the Fiat Punto / Grande Punto, with the original Fiat optical groups with LED position lights. We can buy the optical groups in specialized sites, both offline and online. To replace the headlights, proceed by opening the tailgate and removing the two originals from their seat, disconnecting the power connectors; we can retrieve the bulbs and keep them in spare. Now we cut the original connector and we go to mount the new one, using the same power cables. Once this is done, we could mount the new optical groups and verify correct operation; being original Fiat headlights there shouldn't be any particular problems.


Posted on 22 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - How to remove the rear light of the Fiat Punto Mk3? Read Answer
    • Punto 2005-2018 - What is the problem with the rear lights on the Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - What is the problem with the rear lights of the Fiat Punto? Read Answer
    • Punto 2005-2018 - How to remove the rear lights on Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - How to replace the rear light bulb on Fiat Punto? Read Answer
    • Punto 2005-2018 - How much does the Fiat Grande Punto led rear light cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos