Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Auxiliary Belt on a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: V-belt

Before starting, exit the cabin of your Fiat Punto and lift the front end using a ramp or jack. Begin by loosening the tensioner that holds the auxiliary belt in tension. Next, move the auxiliary belt from its housing. This will free the V-belt. At this point, remove it, and you will have completed the disassembly. To fit the new belt, repeat this procedure in reverse, and you will have finished replacing the auxiliary belt on your Fiat Punto.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Auxiliary Belt on a Fiat Grande Punto?
How to Replace the Auxiliary Belt on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the auxiliary belt on a Fiat Grande Punto, lift the car to access the side of the engine block from underneath. Here, you can loosen the c…
How to Replace the Auxiliary Belt on a Fiat Punto?
How to Replace the Auxiliary Belt on a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. In this tutorial, see how to replace the auxiliary belt on a Fiat Punto. This operation is straightforward but requires good.. …
Replacement of the Timing Belt on the Fiat Punto 1.9 JTD
Replacement of the Timing Belt on the Fiat Punto 1.9 JTD
Fiat Punto (1999-2011 / MK 2, 188) In this guide, follow the instructions to remove and replace the timing belt on the Fiat Punto 1.9 JTD. First, lift the vehicle and remove the front …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos