Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on a Fiat Punto Evo?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: V-belt

See other generations:
Video tutorial

To replace the serpentine belt on a Fiat Punto Evo, lift the car to access the components underneath, allowing you to reach the pulleys on the side of the engine. By loosening the central nut of the tensioner pulley, you can reduce the tension on the belt, enabling its removal from the housing and replacement with a new one. After replacing, refit the central nut of the tensioner pulley to ensure it functions correctly: start the car to check its proper operation.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the Auxiliary Belt on a Fiat Punto
How to Replace the Auxiliary Belt on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before starting, exit the cabin of your Fiat Punto and lift the front end using a ramp or jack. Begin by loosening the tensioner that holds the auxil…
Guide to Replacing the Timing Belt of the Fiat Punto Evo 1.2
Guide to Replacing the Timing Belt of the Fiat Punto Evo 1.2
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide will provide all the instructions to remove and replace the timing belt and water pump of the Fiat Punto Evo 1.2. First, raise the vehicle…
Replacing the Timing Belt on a Fiat Grande Punto - Punto Evo 1.2 Petrol
Replacing the Timing Belt on a Fiat Grande Punto - Punto Evo 1.2 Petrol
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will see the steps to change the timing belt on a Fiat Grande Punto or Punto Evo with a 1.2 petrol engine. First, lift the vehicle…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos