Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Fiat Punto Evo 1.2

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Timing belt

See other generations:
Video tutorial

In this guide we will see all the instructions that will allow us to disassemble and replace the timing belt and water pump of the Fiat Punto Evo 1.2. First of all, we lift the car and start by removing the right front wheel, also removing the wheel arch; we remove the crankshaft pulley by first removing the V-belt, as shown in the video.

At this point we remove the distribution cover and disconnect the coolant pipe; we replace the timing belt and water pump kit, following the video tutorial until the end!


Posted on 3 December 2024 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Fiat Punto 1.4
Guide to Replacing the Timing Belt on the Fiat Punto 1.4
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide will show you the main steps for removing and replacing the timing belt on the Fiat Punto 1.4. First, open the bonnet of the vehicle and s…
Replacing the Timing Belt on a Fiat Grande Punto - Punto Evo 1.2 Petrol
Replacing the Timing Belt on a Fiat Grande Punto - Punto Evo 1.2 Petrol
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will see the steps to change the timing belt on a Fiat Grande Punto or Punto Evo with a 1.2 petrol engine. First, lift the vehicle…
Guide to Replacing the Timing Belt on the Fiat Punto 1.2
Guide to Replacing the Timing Belt on the Fiat Punto 1.2
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's instructions will show you the procedure for removing and replacing the timing belt on the Fiat Punto 1.2. First, open the bonnet of the vehi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos