Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Windscreen Washer Pump on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Pump

See other generations:
Video tutorial

Today, let's go through the instructions to remove and replace the windscreen washer pump on a Fiat Punto. First, remove the front left wheel by lifting the vehicle, and locate the washer fluid reservoir and the pump.

Then disconnect the electrical connector from the pump to detach and remove it, as shown in the video. At this point, install the new windscreen washer pump, securing it properly and reconnecting the electrical connector and hoses.

Finally, refit the front wheel and check the operation of the washer system!


Updated on 26 October 2026 by ScegliAuto


Related tutorials

Replacing the Wiper Motor on Fiat Punto
Replacing the Wiper Motor on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this guide, learn how to replace the wiper motor on a Fiat Punto. Pull the plastic lever located at the bottom left of the dashboard, lift the eng…
Removing the Wiper Motor from a Fiat Grande Punto
Removing the Wiper Motor from a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, you will learn how to remove the wiper motor from a Fiat Grande Punto. First, remove the wipers by unscrewing the nuts to take them…
Removing and Replacing the Windscreen Washer Nozzles on the Fiat Punto
Removing and Replacing the Windscreen Washer Nozzles on the Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) This brief and simple guide provides instructions for removing and replacing the windscreen washer nozzles on the Fiat Punto. First, open the bonnet …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos