Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How do you replace the water pump of a Fiat Punto?

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Pump
Operation: How do you replace the water pump of a Fiat Punto?

To replace the water pump of the Fiat Punto, you need to open the hood so that you can access the components located inside the engine compartment. On the left side of the engine block, you will be able to locate the timing belt, which must be disconnected from the water pump pulley. By loosening the central nut of the pulley, you can remove it completely and also remove the water pump underneath from its housing. At this point, you can insert the new water pump and verify that everything is working correctly.


Posted on 25 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the wiper pump fuse located in the FIAT Grande Punto? Read Answer
    • Punto 1999-2011 - What problems does the Fiat Punto oil pump have? Read Answer
    • Punto 2005-2018 - How much does it cost to replace the oil pump in the Fiat Punto 1.3 MultiJet? Read Answer
    • Punto 1999-2011 - How much does it cost to replace the water pump on a Fiat Punto? Read Answer
    • Punto 1999-2011 - How much does a pump cost for the Fiat Punto 1.3 Multijet? Read Answer
    • Punto 2005-2018 - How much does the water pump cost in the Fiat Grande Punto? Read Answer
    • Punto 1993-1999 - How much does it cost to replace the water pump on a Fiat Punto? Read Answer
    • Punto 2005-2018 - When does the water pump cost on the Fiat Punto? Read Answer
    • Punto 2005-2018 - Where is the Fiat Grande Punto headlight washer fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos