Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the water pump of the Fiat Grande Punto 1.2

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Pump

See other generations:
Video tutorial

Today we will see the instructions that will allow us to dismantle and replace the water pump of the Fiat Grande Punto 1.2. First, we open the hood of the car and start dismantling and removing the engine support and the distribution cover, lifting the car and disconnecting the V-belt; we remove the crankshaft pulley and then the timing belt.

At this point, we unscrew the screws of the water pump pulley, carrying out the repair or replacement; we install the new original components, also replacing the timing belt.


Posted on 24 October 2025 by ScegliAuto


Related tutorials

How to replace the water pump on a Fiat Punto?
How to replace the water pump on a Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the water pump on a Fiat Punto, open the bonnet to access the components located inside the engine compartment: on the left side of the en…
Guide to replacing the timing belt of the Fiat Punto Evo 1.2
Guide to replacing the timing belt of the Fiat Punto Evo 1.2
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this guide we will see all the instructions that will allow us to disassemble and replace the timing belt and water pump of the Fiat Punto Evo 1.2…
How to Remove the Water Pump from a Fiat Punto
How to Remove the Water Pump from a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before starting, open the bonnet of your Fiat Punto. Begin by unclipping and removing the upper engine cover, then repeat this step for the auxiliary…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos