Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Fiat Punto 1.2

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Timing belt

Today's instructions will show us the procedure for disassembling and replacing the timing belt of the Fiat Punto 1.2. First, we open the hood of the car and start disassembling the engine support; then we lift the car and remove the front wheel, removing the wheel arch and disconnecting the V-belt, as shown in the video. At this point, we remove the crankshaft pulley and remove the distribution cover, accessing the belt; we take the necessary references for replacement, following the video until the end!

Posted on 23 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Fiat Punto 1.4
Guide to replacing the timing belt of the Fiat Punto 1.4
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The instructions in this guide will show us the main steps useful for disassembling and replacing the timing belt of the Fiat Punto 1.4. First, we op…
Guide to Replacing the Timing Belt on the Fiat Grande Punto 1.4
Guide to Replacing the Timing Belt on the Fiat Grande Punto 1.4
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The main instructions provided in this guide will show us how to disassemble and replace the timing belt of the Fiat Grande Punto 1.4. First, let's o…
Guide to replacing the timing belt of the Fiat Punto Evo 1.2
Guide to replacing the timing belt of the Fiat Punto Evo 1.2
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this guide we will see all the instructions that will allow us to disassemble and replace the timing belt and water pump of the Fiat Punto Evo 1.2…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos