Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Right Engine Mount on a Fiat Grande Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Engine mount

See other generations:
Video tutorial

To replace the engine mount on the right side of the Fiat Grande Punto, open the bonnet to access the engine bay. Here, on the right side of the engine (the left side when facing the front of the car), you will find the mount hidden beneath the air filter housing.

Once this housing is removed, you can access the underlying components and unscrew the bolts securing the mount.

After it has been removed, you can insert the new replacement part and close the bonnet.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

Replacing the engine mount on the Fiat Grande Punto 1.4
Replacing the engine mount on the Fiat Grande Punto 1.4
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide will show you how to remove and replace the engine mount on the Fiat Grande Punto 1.4, following the instructions below. First, open the b…
How to Remove the Engine Mount on Fiat Grande Punto
How to Remove the Engine Mount on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Follow these steps to remove the engine mount on a Fiat Grande Punto. This operation is not complex if you follow the steps in order: Lift the car on…
How to replace the timing belt on the Fiat Grande Punto
How to replace the timing belt on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Begin the timing belt replacement operation on the Fiat Grande Punto by opening the front bonnet and removing the engine support bolts using an elect…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos