Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to remove the engine mount on Fiat Grande Punto

Fiat Punto - Video tutorial

Model: Fiat Punto Punto EVO, Grandepunto , MK 3, 199 - Years 2005-2018
Part: Engine mount
Operation: How to remove the engine mount on Fiat Grande Punto

Let's see how to remove the engine mount on Fiat Grande Punto. Not a complex operation if you follow the steps in order, let's see: we lift the car on a column bridge and put it in safety; unscrew the metal pin under the engine with a socket wrench, immediately afterwards, remove the pin unscrewed previously, unscrew the tightening pins left around the engine support plate with our socket wrench. Finally we extract the support from its housing and replace it with the new one, tighten the pins around the support. At the end of the assembly we close the engine hood.


Posted on 29 October 2023 by ScegliAuto



Engine mount replacement for the Fiat Grande Punto 1.4.
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Today's guide will show us how to disassemble and replace the engine mount of the Fiat Grande Punto 1.4, following the instructions below. First, we
Assembly of roof racks Fiat Punto Evo - Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this video tutorial we will see the instructions that will allow us to mount the roof racks on a Fiat Punto Evo, but also on the Grande Punto. The
How to remove the gearbox and clutch of the Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In today's video tutorial we will see the main steps that will allow us to disassemble the gearbox and clutch of the Fiat Grande Punto 1.2, but also

    Frequently Asked Questions

    • Punto 2005-2018 - How much does the engine mount cost for a Fiat Punto? Read Answer

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos