Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the engine mount on the Fiat Grande Punto 1.4

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Engine mount

This guide will show you how to remove and replace the engine mount on the Fiat Grande Punto 1.4, following the instructions below. First, open the bonnet and lift the engine from below using a jack; then undo the mounting bolts of the engine mount using a socket wrench with an extension to remove it, as shown in the video. At this point, install the new engine mount, securing it with the appropriate bolts; then remove the jack from under the engine, following the video tutorial to the end!

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Engine Mount on Fiat Grande Punto
How to Remove the Engine Mount on Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Follow these steps to remove the engine mount on a Fiat Grande Punto. This operation is not complex if you follow the steps in order: Lift the car on…
Removing the Engine Mount of a Fiat Grande Punto
Removing the Engine Mount of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, we will see how to remove the engine mount of a Fiat Grande Punto. Pull the lever to open the engine compartment and lift the bonnet, …
How to replace the timing belt of the Fiat Grande Punto
How to replace the timing belt of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) We start the operation of replacing the timing belt on the Fiat Grande Punto by opening the front hood and removing the engine support bolts with an …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos