Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Fiat Punto 1.4

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Timing belt

The instructions in this guide will show us the main steps useful for disassembling and replacing the timing belt of the Fiat Punto 1.4. First, we open the hood of the car and start disassembling and removing the engine support by unscrewing the fastening screws; we remove the distribution cover and disconnect the V-belt. At this point, we remove the crankshaft pulley and take the necessary references for the replacement of the belt and subsequent timing, installing the original one, following the video tutorial until the end!

Posted on 24 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Fiat Grande Punto 1.4
Guide to Replacing the Timing Belt on the Fiat Grande Punto 1.4
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The main instructions provided in this guide will show us how to disassemble and replace the timing belt of the Fiat Grande Punto 1.4. First, let's o…
Guide to replacing the timing belt of the Fiat Punto Evo 1.2
Guide to replacing the timing belt of the Fiat Punto Evo 1.2
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this guide we will see all the instructions that will allow us to disassemble and replace the timing belt and water pump of the Fiat Punto Evo 1.2…
Replacing the Timing Belt on a Fiat Grande Punto - Punto Evo 1.2 Petrol
Replacing the Timing Belt on a Fiat Grande Punto - Punto Evo 1.2 Petrol
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will see the steps to change the timing belt on a Fiat Grande Punto or Punto Evo with a 1.2 petrol engine. First, lift the vehicle…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos