Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Control Bulbs on a Fiat Punto EVO

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
Video tutorial

Let's see how to replace the heating control bulbs on a Fiat Grande Punto and Fiat Punto EVO. First, get inside the vehicle and remove the stereo using the appropriate tools that fit into the holes; push and pull out the stereo, disconnecting the electrical cable at the back.

Next, unscrew the screws underneath to remove the radio support, then proceed to remove the climate control knobs; disconnect the electrical cables to access the bulbs for replacement!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

Replacing the Heating Control Bulbs on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Here's how to replace the bulbs that illuminate the heating controls on a Fiat Punto. Using the appropriate hooks, remove the radio from its slot and…
How to Replace the Heating Control Bulbs on a Fiat Punto
How to Replace the Heating Control Bulbs on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before starting, sit in the driver's seat of your Fiat Punto. Begin by removing the radio using the appropriate extraction keys, then disconnect the …
Replacing the Heating Control Bulbs on a Fiat Grande Punto
Replacing the Heating Control Bulbs on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will learn how to replace the bulbs for the heating control illumination on a Fiat Grande Punto. First, remove the car radio using…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos