Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Heating Control Bulbs on a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Light bulb

Here's how to replace the bulbs that illuminate the heating controls on a Fiat Punto. Using the appropriate hooks, remove the radio from its slot and disconnect the rear connections to take it out. Remove the lower trim of the central console, unclip the four upper catches in the space left by the radio, and unscrew the two upper and two lower screws of the trim to remove it. Unscrew the cross screw that holds the transparent levers, giving you access to the burnt-out bulbs which can then be replaced with two new ones. Check that the bulbs work correctly and reassemble everything in reverse order.

Updated on 9 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Let's see how to replace the heating control bulbs on a Fiat Grande Punto and Fiat Punto EVO. First, get inside the vehicle and remove the stereo usi…
Fiat Punto (1999-2011 / MK 2, 188) Today we will see the instructions that will allow us to disassemble and replace the heater radiator of the Fiat Punto. In order to access the heater…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will learn how to replace the bulbs for the heating control illumination on a Fiat Grande Punto. First, remove the car radio using…

    Frequently Asked Questions

    • Punto 2005-2018 - Which bulbs to use for the sidelights of the Fiat Punto? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos