Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Climate Control Bulbs on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Instrument panel light

See other generations:
Video tutorial

Here are the instructions to remove and replace the climate control bulbs on a Fiat Punto. First, get into the vehicle and start by removing the plastic cover of the climate control controls.

Next, remove the control knobs by pulling them off and then take out the small bulb-type bulbs as shown in the video. At this point, install the new bulbs of the correct type and with the same fitting; then reinstall the knobs and the plastic cover, following the video tutorial to the end!


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Replace the Switches and Bulbs for the Climate Control on a Fiat Punto
How to Replace the Switches and Bulbs for the Climate Control on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide will allow you to remove and replace the switches and bulbs for the climate control on the Fiat Punto. First, get inside the vehicle and s…
Replacing Climate Control Bulbs on Fiat Punto Evo
Replacing Climate Control Bulbs on Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial, you will see how to remove and replace the bulbs for the climate control buttons on a Fiat Punto Evo, as well as the Grande Punto. …
How to Replace the Heating Control Bulbs on a Fiat Punto EVO
How to Replace the Heating Control Bulbs on a Fiat Punto EVO
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Let's see how to replace the heating control bulbs on a Fiat Grande Punto and Fiat Punto EVO. First, get inside the vehicle and remove the stereo usi…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos