Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs on the Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

In today's video tutorial, you will see instructions on how to remove and replace the front headlight bulbs on the Fiat Punto Evo, as well as the Grande Punto. First, open the bonnet of your car and start by removing the plastic protective cover found behind the headlight; then disconnect the connector of the dipped beam bulb, followed by removing the bulb and the position light, as shown in the video.

At this point, install the new LED bulbs with the same fitting; connect them and secure them properly in the headlight assembly!


Updated on 10 June 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulbs on the Fiat Grande Punto - Punto Evo
Replacing the Front Headlight Bulbs on the Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial video, learn how to remove and replace the front headlight bulbs on the Fiat Grande Punto, as well as the Punto Evo. First, open the…
How to Replace the Bulbs of the Rear Light on a Fiat Punto Evo
How to Replace the Bulbs of the Rear Light on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replace the bulbs of the rear light on a Fiat Punto Evo. Let's see how to remove the light and replace the bulbs: open the boot lid, unscrew the secu…
How to Replace the Headlight Bulbs on a Fiat
How to Replace the Headlight Bulbs on a Fiat
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Let's see how to replace the headlight bulbs on a Fiat Grande Punto: open the front bonnet by pulling the lever located at the bottom right of the da…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos