Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Headlight on a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Headlight

To remove the front headlight on a Fiat Grande Punto, open the bonnet and first remove the front bumper. Unscrew the screws located at the top near the grille, those in the wheel arch, and the fixings at the bottom of the bumper, then carefully detach the sides and slide the bumper off. Once the bumper is removed, locate the screws that secure the headlight to the bodywork and unscrew them. At this point, gently pull the headlight assembly outwards to free it from its housing. Before completely removing it, disconnect the electrical connector attached to the headlight. After disconnecting the wiring, the headlight can be fully extracted from the vehicle.

Posted on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this brief guide, learn how to remove and replace the front headlight on the Fiat Grande Punto, as well as the Punto Evo, in simple and quick step…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Want to replace the front headlamp of a Fiat Grande Punto? This guide shows how to remove the headlamp from the car's bodywork. Lift the boot lid, an…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, follow the step-by-step instructions to remove and replace the dipped beam bulb of the front headlamp on a Fiat Grande Punto. First, o…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos