Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of the Fiat Punto Evo - Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Tail light

In this video tutorial, you will learn how to disassemble and replace the rear light of the Fiat Punto Evo, as well as the Grande Punto. First, open the tailgate and begin by unscrewing the screws located on the side of the light using a cross screwdriver; then gently remove the light, disconnecting the electrical connector of the bulbs, as illustrated in the video. At this point, you can replace the bulbs of the rear light if necessary; then reassemble the entire rear light by reversing the procedure!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. to remove and replace the rear lights on a Fiat Grande Punto and Punto Evo by following these simple steps. First, open the boot and unscrew the fixing.. …
How to Change the Rear Brake Shoes on a Fiat Grande Punto - Punto Evo
How to Change the Rear Brake Shoes on a Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. remove and replace the rear brake shoes on a Fiat Grande Punto, as well as on the Punto Evo. First, lift the vehicle and remove the rear wheel; then proceed.. …
Resetting Engine Warning Light on Fiat Grande Punto - Punto Evo
Resetting Engine Warning Light on Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) .. way to reset the engine warning light on a Fiat Grande Punto and Punto Evo, following the instructions below. First, ensure that you have resolved the.. …

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos