Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper Grille of the Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Grille

See other generations:
Video tutorial

In this section, you will learn how to replace the grille or mask of the front bumper of the Fiat Grande Punto. Use a flat and pointed screwdriver to release the 19 clips located on the mask: carefully work your way around the mask to detach it. It is likely that some clips may already be broken, especially if you have experienced minor bumps or collisions.

Once released, you should be able to remove the mask. To remove the badge, simply undo the nut with a spanner and the clips holding it in place.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Removing the Front Grille of the Fiat Grande Punto
Removing the Front Grille of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To personalise your vehicle by replacing the lower grille, located beneath the number plate, follow these steps: use a sharp object to gently release…
Removing Fog Light with Bulb from a Fiat Grande Punto Evo
Removing Fog Light with Bulb from a Fiat Grande Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, learn how to remove the fog light with bulb from a Fiat Grande Punto Evo. Start by removing the plastic grille frame around the side f…
How to Remove the Front Headlight on a Fiat Grande Punto
How to Remove the Front Headlight on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To remove the front headlight on a Fiat Grande Punto, open the bonnet and first remove the front bumper. Unscrew the screws located at the top near t…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos