|
Do it yourself
| |||
| ||||
How to Install New Grilles in a Fiat Grande Punto
Model: Fiat Punto
199, MK 3, Grandepunto , Punto EVO
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
To install new grilles in a Fiat Grande Punto, first remove the old clip-in grilles: simply unclip them and pull them out of their position. Before proceeding with the installation of the new components, ensure the bumper is clean and degreased. At this point, use a syringe with body sealant, either polyurethane or standard silicone, and then clip the upper grille into place. Next, move on to the installation of the lower grille: apply some adhesive, position the grille adhering it first to the lower edge, and use body tape to temporarily secure it at the edges so it does not fall while you work on securing the upper part. Also secure the upper part of the grille with tape, placing a strip both above and below the fixing line where you will insert the syringe with the sealant; this will allow for a clean job once the tape is removed.
Updated on 16 June 2026 by ScegliAuto
Related tutorials
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
Below is the procedure to remove and replace the engine spark plugs on the Fiat Grande Punto, following the instructions provided. First, open the bo…
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
Does the front headlight of your Fiat Grande Punto have blown bulbs? Let's replace them with new bulbs. Open the bonnet by pulling the release lever …
Fiat Punto
(2005-2018 /
199, MK 3, Grandepunto , Punto EVO)
In this tutorial video, learn how to remove and replace the front headlight bulbs on the Fiat Grande Punto, as well as the Punto Evo. First, open the…
Other guides you may be interested in
|
How to Open the Fuel Filler Flap in the Hyundai i30?
In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.034
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |