Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Spark plugs

See other generations:
Video tutorial

Below is the procedure to remove and replace the engine spark plugs on the Fiat Grande Punto, following the instructions provided. First, open the bonnet of your car and begin by removing the air filter box. Then, disconnect the spark plug connectors and use a socket wrench with an extension to unscrew and remove them, as shown in the video.

At this point, install the new spark plugs of the correct type and with the same thread pitch; hand-tighten them before gently tightening with the wrench!


Updated on 2 September 2026 by ScegliAuto


Related tutorials

Removing the Glow Plugs on a Fiat Punto - Grande Punto 1.3 Multijet
Removing the Glow Plugs on a Fiat Punto - Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video tutorial, you will learn how to remove and replace the glow plugs on the Fiat Punto 1.3 Multijet, as well as on the Grande Punto and…
Replacing Glow Plugs on a Fiat Grande Punto 1.3 MultiJet
Replacing Glow Plugs on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to remove and replace the glow plugs on a Fiat Grande Punto 1.3 MultiJet engine. First, open the bonnet an…
How to Replace the Spark Plugs on a Fiat Grande Punto?
How to Replace the Spark Plugs on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the spark plugs on a Fiat Grande Punto, open the bonnet to detach the plastic cover on top of the engine block. Once the cover is removed,…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos