Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Removing the glow plugs on the Fiat Punto - Grande Punto 1.3 Multijet

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Glow plugs
Operation: Removing the glow plugs on the Fiat Punto - Grande Punto 1.3 Multijet

In today's video tutorial we will see how to remove and replace the engine glow plugs on the Fiat Punto 1.3 Multijet, but also on the Grande Punto and Punto Evo. First we open the engine hood and remove the upper plastic protection; after which we go to disconnect the pipettes or the connectors of our glow plugs. At this point we use a socket wrench with extension to unscrew and remove our four glow plugs; so let's replace them with the new ones, having the same pitch and the same thermal gradation. Now let's reassemble everything, applying the reverse procedure!


Posted on 11 June 2022 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - How do you replace the glow plugs on a Fiat Punto with a 1.3 MultiJet engine producing 75 horsepower? Read Answer
    • Punto 2005-2018 - How much does it cost to replace the glow plugs in the Fiat Punta 1.3 Multijet? Read Answer
    • Punto 2005-2018 - How much do the glow plugs cost for the Fiat Punto? Read Answer
    • Punto 2005-2018 - How much do the glow plugs cost for the Fiat Punto? Read Answer
    • Punto 2005-2018 - What does the glow plug warning light mean in the Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - How much does it cost to replace the glow plugs on my Fiat Grande Punto 1.3 MultiJet 90 hp? Read Answer
    • Punto 1999-2011 - Glow plugs warning light on Fiat Punto 1.3 multijet? Read Answer
    • Punto 2005-2018 - Where are the Fiat Punto Evo glow plugs located? Read Answer
    • Punto 1999-2011 - How much does it cost to replace the glow plugs on the Fiat Punto multijet? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos