Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs in a Fiat Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Glow plugs

In today's video, you will see how to replace the glow plugs in a Fiat Punto MultiJet. First, open the vehicle's engine bonnet using the lever inside. Then remove the plastic cover that conceals the engine compartment to access the glow plugs. Proceed by removing the four units and replace them with new ones, using the appropriate tools. Refit the plastic cover and close the bonnet. Finally, test the vehicle to ensure the work has been completed correctly.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove and Replace the Spark Plugs on a Fiat Punto Evo
Remove and Replace the Spark Plugs on a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This video shows how to remove and replace the spark plugs on a Fiat Punto Evo. Open the engine bay, lift the front bonnet, and secure it. Disconnect…
How to Remove the Spark Plugs from a Fiat Punto
How to Remove the Spark Plugs from a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the spark plugs from a Fiat Punto? Open the front bonnet and proceed with the spark plug removal. Lift the bonnet and secure it, then r…
How to replace the glow plugs of the Fiat Punto Evo 1.3 Multijet
How to replace the glow plugs of the Fiat Punto Evo 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this short guide, we will see the instructions that will allow us to disassemble and replace the glow plugs of the Fiat Punto Evo and Grande Punto…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos