Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the glow plugs of the Fiat Punto Evo 1.3 Multijet

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Glow plugs

In this short guide, we will see the instructions that will allow us to disassemble and replace the glow plugs of the Fiat Punto Evo and Grande Punto 1.3 Multijet. First, we open the hood of the car and start removing the air filter box and the intake hose found at the top; then we disconnect the connectors of the glow plugs located at the bottom on the cylinder head, using a socket wrench with extension to unscrew and remove them, as shown in the video. At this point, we install the new glow plugs, as well as the original ones.

Posted on 19 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Glow Plugs on a Fiat Punto - Grande Punto 1.3 Multijet
Removing the Glow Plugs on a Fiat Punto - Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, you will learn how to remove and replace the glow plugs on the Fiat Punto 1.3 Multijet, as well as on the Grande Punto and…
Replacing Glow Plugs on a Fiat Grande Punto 1.3 MultiJet
Replacing Glow Plugs on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video tutorial, you will learn how to remove and replace the glow plugs on a Fiat Grande Punto 1.3 MultiJet engine. First, open the bonnet an…
How to Replace the Glow Plugs on the Fiat Punto 1.3 MultiJet
How to Replace the Glow Plugs on the Fiat Punto 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Discover in this video how to remove and replace the glow plugs in the engine of the Fiat Punto second series, with a 1.3 MultiJet engine. First, ope…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos