Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to replace the glow plugs on the Fiat Punto 1.3 Multijet

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Glow plugs
Operation: How to replace the glow plugs on the Fiat Punto 1.3 Multijet

Let's find out in this video how to remove and replace the engine glow plugs on the second series Fiat Punto, with 1.3 MultiJet engine. First of all we open the bonnet of our car and we go to disconnect the intake sleeve, then removing the engine protection; after which we remove the caps or the pipettes of the glow plugs and use a socket wrench with extension to unscrew them, as shown in the video. At this point we replace the glow plugs with new ones, of the right type; we just have to screw it by hand and then tighten with a key, following the video to the end!


Posted on 2 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - How do you replace the glow plugs on a Fiat Punto with a 1.3 MultiJet engine producing 75 horsepower? Read Answer
    • Punto 2005-2018 - How much does it cost to replace the glow plugs in the Fiat Punta 1.3 Multijet? Read Answer
    • Punto 2005-2018 - How much do the glow plugs cost for the Fiat Punto? Read Answer
    • Punto 2005-2018 - How much do the glow plugs cost for the Fiat Punto? Read Answer
    • Punto 2005-2018 - What does the glow plug warning light mean in the Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - How much does it cost to replace the glow plugs on my Fiat Grande Punto 1.3 MultiJet 90 hp? Read Answer
    • Punto 1999-2011 - Glow plugs warning light on Fiat Punto 1.3 multijet? Read Answer
    • Punto 2005-2018 - Where are the Fiat Punto Evo glow plugs located? Read Answer
    • Punto 1999-2011 - How much does it cost to replace the glow plugs on the Fiat Punto multijet? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos