Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Selector Cable in a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Spark plugs

See other generations:
Video tutorial

Today, I will explain how to replace the gear selector cable on a Fiat Grande Punto vehicle. The cable runs from the gear lever inside the cabin to the gearbox underneath the car. To replace the cable, you need to remove the gear knob and gaiter.

Remove the screws securing the cable support to the lever and disconnect the cable from the gear lever. Remove the retaining clips that hold the cable in place inside the gearbox.

Before installing the new cable, it is important to compare it with the old one to ensure that the length and ends are the same. Insert the start of the cable into the gearbox securing it to the supports, then route the cable inside the cabin through the gear lever, repositioning the clips.

After fitting the gaiter and gear knob, before lowering the car, move the gear lever to ensure that each gear engages correctly. Then lower the car to the ground and take it for a test drive to ensure there are no issues.


Posted on 20 February 2026 by ScegliAuto


Related tutorials

How to Adjust and Replace the Gear Cable on a Fiat Grande Punto?
How to Adjust and Replace the Gear Cable on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To adjust and replace the gear cable on a Fiat Grande Punto, disconnect the battery and completely remove it from its housing. The cable is located n…
How to Replace the Gear Shift Bowden Cable on the Fiat Grande Punto
How to Replace the Gear Shift Bowden Cable on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, see how to replace the broken gear shift cable on a Grande Punto. The broken part is the Bowden cable, which contains a metal cable wi…
How to Replace the Gear Cable on a Fiat Punto Evo?
How to Replace the Gear Cable on a Fiat Punto Evo?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the gear cable on a Fiat Punto Evo, detach the gear knob and the surrounding trim: this will allow access to the components underneath. He…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos