Do it yourself
| ||||
|
Fiat Punto - Video tutorial
Model: Fiat Punto
MK 3, 199, Punto EVO, Grandepunto
- Years 2005-2018 In this video, we see how to replace the broken gear shift cable on a Grande Punto. The cable that breaks is the Bowden cable, a device that contains a metal cable with mechanical linkages inside. To remove it, we need to go under the car, where we find a pressure partition that supports the linkage; we remove it and locate the broken cable, then try to remove it by eliminating all the fasteners. Finally, we have our cable in hand and can see that it has been completely severed; it must be replaced. Now we put the cable back into the housing and reposition it, greasing it well and connecting it on the other side.
Posted on 4 February 2024 by ScegliAuto
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |