Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Gear Cable on a Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Checks and maintenance

To replace the gear cable on a Fiat Punto, lift the car on the driver's side only and remove the six Torx screws securing the plastic cover of the gearbox, located underneath the vehicle. Use a spanner to disconnect the cable from the gearbox and use pliers to remove the fixing fork of the gearbox. At this point, you can slide the cable out of the bracket and, using a screwdriver, lever to lift the cable retaining clip, accessing it from the engine bay. Now, from the underside of the vehicle, you can completely remove the cable and replace it with the new spare part.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In order to replace the gear cable of the Fiat Punto Evo, you need to remove the gear knob and also the covering around the lever: this way you will …
Fiat Punto (1999-2011 / MK 2, 188) Replace the gear cable on the Fiat Punto if you have issues. Lift the bonnet and secure it, then use a socket spanner to undo the locking pins of the…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To adjust and replace the gear cable on a Fiat Grande Punto, disconnect the battery and completely remove it from its housing. The cable is located n…

    Frequently Asked Questions

    • Punto 2005-2018 - What problem does the Fiat Punto have with the "city mode"? Read answer
    • Punto 2005-2018 - How to bleed the Fiat Punto clutch pedal? Read answer
    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer
    • Punto 1999-2011 - How does the air conditioning of the Fiat Punto work? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos