Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Cable on a Fiat Punto Evo?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Transmission

See other generations:
Video tutorial

To replace the gear cable on a Fiat Punto Evo, detach the gear knob and the surrounding trim: this will allow access to the components underneath. Here, locate the end of the gear cable, which must be disconnected from the lever by loosening the bolt; the other end of the cable will be accessible from underneath the vehicle, and once loosened, you can pull the cable out. The new cable can now be inserted, ensuring everything functions correctly.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to Adjust and Replace the Gear Cable on a Fiat Grande Punto?
How to Adjust and Replace the Gear Cable on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To adjust and replace the gear cable on a Fiat Grande Punto, disconnect the battery and completely remove it from its housing. The cable is located n…
How to Replace the Gear Cable on a Fiat Punto?
How to Replace the Gear Cable on a Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To replace the gear cable on a Fiat Punto, lift the car on the driver's side only and remove the six Torx screws securing the plastic cover of the ge…
How to Replace the Gear Selector Cable in a Fiat Grande Punto
How to Replace the Gear Selector Cable in a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, I will explain how to replace the gear selector cable on a Fiat Grande Punto vehicle. The cable runs from the gear lever inside the cabin to t…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos