Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs of the Rear Light on a Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light bulb

See other generations:
Video tutorial

Replace the bulbs of the rear light on a Fiat Punto Evo. Let's see how to remove the light and replace the bulbs: open the boot lid, unscrew the securing screws located at the side of the light (right). Disconnect the rear light from its housing once all screws are removed (disconnect the power connectors) and replace the damaged bulbs with new ones (same size and voltage).

Finally, reassemble the light with the associated screws and power connectors. Test the correct operation of the previously installed bulbs.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to replace the rear light bulbs on Fiat Grande Punto
How to replace the rear light bulbs on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Do you want to replace the rear light bulbs on Fiat Grande Punto? Here's how to proceed with the disassembly: first, open the boot lid and unscrew th…
Replacing the Rear Headlamp Bulb on a Fiat Grande Punto
Replacing the Rear Headlamp Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video, you will learn how to replace the rear headlamp bulbs on a Fiat Grande Punto in a few simple steps. First, open the boot and unscre…
How to Replace the Rear Headlamp Bulb on a Fiat Punto Evo
How to Replace the Rear Headlamp Bulb on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this brief and simple guide, remove and replace the stop bulb in the rear headlamp of the Fiat Punto Evo, as well as the Grande Punto. First, open…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos