Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlamp Bulb on a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Tail light bulb

In today's video, you will learn how to replace the rear headlamp bulbs on a Fiat Grande Punto in a few simple steps. First, open the boot and unscrew the side support screws of the headlamp. Then, pull out the headlamp and disconnect the electrical connector at the back. At this point, remove the bulb holder by taking out the bayonet bulbs: to do this, slightly twist and pull them out; then, refit the new bulbs by twisting them in the opposite direction to secure them. Apply the reverse procedure for reassembling the headlamp, as shown in the video!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install H4 LED Bulbs on the Fiat Grande Punto
How to Install H4 LED Bulbs on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To install an H4 LED bulb (dipped and main beam) on a Fiat Grande Punto, start by removing the rubber cap at the back of the headlamp, disconnect the…
Replacing Bulbs on Fiat Grande Punto
Replacing Bulbs on Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the bulbs on a Fiat Grande Punto: open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate …
How to Remove the Rear Light on a Fiat Grande Punto?
How to Remove the Rear Light on a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Removing the rear light on a Fiat Grande Punto is an extremely simple operation, as shown in this tutorial. All you need to do is open the boot lid a…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos