Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Fog Light Bulb on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Light bulb

See other generations:
Video tutorial

In today's tutorial, we will go through the steps to remove and replace the fog light bulb on a Fiat Grande Punto, as well as on the Punto Evo. To access the fog light and reverse light, move to the rear of the light unit; then pull the cable and bulb holder of the fog light outwards, as shown in the video.

At this point, remove the bulb and replace it with a new one, ensuring it is inserted correctly; perform the same operation for the reverse light, following the video tutorial to the end!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Replacing the Rear Headlamp Bulb on a Fiat Grande Punto
Replacing the Rear Headlamp Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video, you will learn how to replace the rear headlamp bulbs on a Fiat Grande Punto in a few simple steps. First, open the boot and unscre…
Replacing the Reversing Light Bulb on the Fiat Grande Punto
Replacing the Reversing Light Bulb on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will see how to remove and replace the reversing light bulb on the Fiat Grande Punto, as well as on the Punto Evo, in sim…
How to Replace the Headlight Bulbs on the Fiat Grande Punto?
How to Replace the Headlight Bulbs on the Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the front headlight bulbs on the Fiat Grande Punto, open the bonnet to access the engine compartment. Next, remove the protective cap loca…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos