Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on the Fiat Grande Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Light bulb

To replace the front headlight bulbs on the Fiat Grande Punto, open the bonnet to access the engine compartment. Next, remove the protective cap located at the rear of the headlight: this will allow you to pull out the old bulb and disconnect it from the connector. Now, connect the new bulb to its connector and insert it back into its housing. Once replaced, close the headlight by fitting the cover back on and check the operation of the new bulb.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Fiat Punto
How to Replace the Headlight Bulb on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Do you want to change the front headlight bulbs on a Fiat Punto but don't know how? Let's see how to proceed in this instructional video. Open the en…
How to Replace the Front Headlight Bulbs of a Fiat Grande Punto
How to Replace the Front Headlight Bulbs of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Let's see how to replace the front headlight bulbs of a Fiat Grande Punto. Open the bonnet by pulling the lever located at the bottom right of the da…
Replacing the Front Headlight Bulbs on the Fiat Grande Punto - Punto Evo
Replacing the Front Headlight Bulbs on the Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial video, learn how to remove and replace the front headlight bulbs on the Fiat Grande Punto, as well as the Punto Evo. First, open the…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos