Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulbs of a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

In this video, you will learn how to replace the front bulbs of a Fiat Grande Punto. Work after the car has been stationary for a while, ensuring it is cold.

Open the front bonnet and locate the position of the headlights. Now, remove the plastic cover from its seat.

Disconnect the power connector of the bulbs and then detach the supports holding the bulb in place; remove the old bulb and fit the new one. It is an H4 bulb that serves as both dipped and main beam. Proceed in the same way to remove the side light and indicator in their respective positions.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Adjust the Headlight Height of the Fiat Grande Punto
How to Adjust the Headlight Height of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this brief and simple guide, you will find instructions to adjust the headlight height of the Fiat Grande Punto, as well as the Punto Evo. First, …
How to Polish Cloudy Headlights on the Fiat Grande Punto
How to Polish Cloudy Headlights on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to polish and restore the clarity of the front headlights on the Fiat Grande Punto and Punto Evo; this pro…
How to Set the Time on a Fiat Grande Punto
How to Set the Time on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos