Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Headlight Height of the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

In this brief and simple guide, you will find instructions to adjust the headlight height of the Fiat Grande Punto, as well as the Punto Evo. First, position yourself in a fixed reference point with minimal light; then start the vehicle and open the bonnet to make any necessary adjustments.

At this point, check that both beams from both headlights are at the same height; if not, adjust using the manual screw, raising or lowering the headlight unit, following the video tutorial to the end!


Updated on 8 July 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this guide we will see the instructions that will allow us to adjust the height of the front headlights of the Fiat Punto Evo, but also of the Gra…
Fiat Punto (1999-2011 / MK 2, 188) In today's video tutorial, you will see the instructions for adjusting the height and depth of the front headlights on a Fiat Grande Punto and Punto …
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to adjust the handbrake on a Fiat Grande Punto by following the instructions below. First, get in the vehi…

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos