Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

In this video tutorial, you will learn how to adjust the handbrake on a Fiat Grande Punto by following the instructions below. First, get in the vehicle and remove the plastic cover of the centre tunnel, thus accessing the handbrake adjusters; then use a socket spanner to adjust the handbrake screw so that it has the correct travel, as shown in the video.

Check the operation of the handbrake; replace the rear shoes if it still does not stop the vehicle properly.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on a Fiat Grande Punto
How to Adjust the Handbrake on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) .. This video shows how to adjust the handbrake on a Fiat Grande Punto. Using a screwdriver, remove the cover located under.. …
Handbrake Adjustment on Fiat Grande Punto
Handbrake Adjustment on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To adjust the handbrake on your car, there are usually two bolts located behind it, hidden by a protective plastic cover, which you can use to set th…
How to Adjust the Handbrake on the Fiat Punto?
How to Adjust the Handbrake on the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To adjust the handbrake on the Fiat Punto, you need to tighten the bolts located at the ends of the cables. To perform this operation, you will need …

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos