Do it yourself
Frequently asked questions about cars and motorcycles

How to Polish Cloudy Headlights on the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018

In this video tutorial, you will learn how to polish and restore the clarity of the front headlights on the Fiat Grande Punto and Punto Evo; this procedure applies to all car models. First, obtain a suitable product for polishing and renewing the clarity of the headlights; alternatively, you can use abrasive paste, followed by polishing with polish. Another option is to use very fine sandpaper; wet the sandpaper and apply light pressure on the headlight, making uniform movements: finally, polish everything.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, you will learn how to remove and replace the rear lights on a Fiat Grande Punto and Punto Evo by following these simple steps. Firs…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, you will see how to remove the front headlights on the Fiat Grande Punto, a very simple and quick operation. First, ensure the key …
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, see how to remove the front bumper and the two headlights on the Fiat Grande Punto. First, position the vehicle on level ground and…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos