Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Reversing Light Bulb on the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Light bulb

See other generations:
Video tutorial

In this video tutorial, you will see how to remove and replace the reversing light bulb on the Fiat Grande Punto, as well as on the Punto Evo, in simple steps. First, lower yourself to the rear of the vehicle to access the inside of the bumper, on the side of the reversing light bulb; then, extract the bulb along with the entire cable and holder, as shown in the video.

At this point, remove and replace the bulb with a new one of the correct type (in this case, a LED bulb is installed); then reassemble everything!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Replacing the Rear Headlamp Bulb on a Fiat Grande Punto
Replacing the Rear Headlamp Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video, you will learn how to replace the rear headlamp bulbs on a Fiat Grande Punto in a few simple steps. First, open the boot and unscre…
Replace the Fog Light Bulb on a Fiat Grande Punto
Replace the Fog Light Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's tutorial, we will go through the steps to remove and replace the fog light bulb on a Fiat Grande Punto, as well as on the Punto Evo. To ac…
How to Replace the Headlight Bulbs on the Fiat Grande Punto?
How to Replace the Headlight Bulbs on the Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the front headlight bulbs on the Fiat Grande Punto, open the bonnet to access the engine compartment. Next, remove the protective cap loca…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos