Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Fog Light Bulb on a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Fog lights

If the fog light bulb has blown and you have some tools and good manual skills, replacing it is a DIY task you can complete by following these simple steps. If you cannot lift the car on a ramp, the first thing to do is lift the car with a jack and remove the wheel. Next, to access the fog light, unscrew the screws that hold the wheel arch to the wing (there's no need to remove it completely, just open it). Now that you can see the fog light, gently disconnect the connector and turn the plastic ring to remove the cover. Detach the clip holding the bulb and pull out the faulty bulb. Replace it with a new one (perhaps an LED), reposition the retaining clip, and reassemble everything.

Updated on 15 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide shows how to replace the fog light bulb on the Fiat Grande Punto. The bulb replacement is very simple as you need to disconnect the power …
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, learn how to remove the fog light with bulb from a Fiat Grande Punto Evo. Start by removing the plastic grille frame around the side f…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this brief and simple guide, follow the steps to activate and deactivate the fog lights, both front and rear, of the Fiat Grande Punto, as well as…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos